Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateTrusted Garage Door Installation for Burbank Homeowners
Getting a new garage door installed in Burbank isn’t a job you want to hand to just anyone. A door that’s out of square, poorly balanced, or wired wrong can fail within months and take your opener with it. Golden Bear Garage Door Repair has been handling installations across Burbank, Hollywood, and the surrounding neighborhoods long enough to know what holds up on Southern California homes. We install, replace, and retrofit doors from LiftMaster, Chamberlain, Genie, Raynor, and the other major brands you actually find in local garages. Whether your current door is sagging on its tracks or you’re planning a full replacement, we quote the job upfront and stand behind the work. Call (833) 467-4118 and we’ll walk you through your options without the sales pitch.
Garage Door Replacement
Garage Door Replacement is the process of removing your existing door, tracks, and hardware, then installing a new system matched to your garage’s dimensions and your home’s style. Burbank homeowners typically need this when a door has rusted through, taken impact damage that bent multiple panels, or simply worn past the point where repairs stop making financial sense. A full replacement in Burbank runs $700 to $2,200 depending on size, material, and insulation level, and that range includes standard labor and hardware. We handle the complete job: we measure your opening, order the right door, and install it with the existing opener or a new one if you’re upgrading.
When Repair Stops Making Sense
We’re a repair-first shop, so we’ll tell you straight when a door still has life in it. Panel replacement at $250 to $500 is often the smarter call on a door that’s structurally sound. But when the track is bent, the spring system is worn, and two or more panels are compromised, you’re approaching the price of a new door before you finish the first round of fixes.
Gil Tanner started Golden Bear with the belief that an honest diagnosis beats a quick sale. If we can fix your door for $300 and give you another five years, we’ll say so. If replacement is the better long-term move, we’ll show you the math on both paths before you decide.
What Gets Replaced, and What Stays
A common misconception is that replacement means everything goes. We evaluate your existing track, springs, and opener separately. If your LiftMaster opener is only three years old and working fine, we’ll install the new door to work with it and save you $250 to $550 on a needless opener swap.
Your old door comes down, the new one goes up, and we haul away the debris. You’ll never find a pile of rusted panels left at the curb after one of our installs.
Styles & brands we work with
Garage Door Installation Service
Garage Door Installation Service covers the full process of fitting a brand new door to your existing garage, from first measurement to final balance test. This is the right choice when you’ve bought a home with no door, when a previous door was removed, or when you want to upgrade to a quieter, better-insulated model before selling. We quote every installation before work begins and the price is fixed once we’ve measured. New door installation through Golden Bear runs $700 to $2,200 in Burbank, with the final number reflecting the door you choose, the size of your opening, and whether we’re integrating a new opener or keeping your current one. For a detailed breakdown of pricing factors, see our Garage Door Installation cost guide.
From Measure to Mounted
We start by measuring your rough opening and checking the level of your garage floor. This catches the issues that lead to gaps, binding, and noisy operation on installs done by less careful crews. We also check the header and surrounding framing, because a door is only as stable as the structure it hangs from.
Then we set the track, mount the panels, wind the springs to spec, and run the full open/close cycle at least a half dozen times. If the door doesn’t rest perfectly level and move without chatter, we adjust it before we call the job done.
Opener Compatibility, Handled Cleanly
If you’re keeping your existing Genie or Chamberlain opener, we’ll verify its horsepower rating against the new door’s weight and resistance. A heavier door on an underpowered opener is a recipe for a burned-out motor, and we’d rather flag that before it happens than sell you a door that strains it.
When you do need an opener installed alongside the door, opener installation is $250 to $550. We’ll wire the sensors, program the remotes, and make sure the auto-reverse is working the way it should.
Commercial Garage Door Installation
Commercial Garage Door Installation handles the heavier doors, higher cycle counts, and stricter safety requirements of Burbank storefronts, warehouses, and shared-use garages. These doors run on bigger hardware, stronger springs, and often need to clear code inspections. We install sectional steel and rolling steel doors for commercial properties, working around your operating hours to minimize disruption. You won’t find a single residential-only crew at Golden Bear; if it rolls on tracks, we put it in and make it right. Pricing for commercial work is quoted per project after a site survey, and we never start a commercial job without a signed scope and a fixed number.
What Makes Commercial Different
Commercial doors cycle open and shut dozens of times a day, which means standard residential springs and hinges fail prematurely. We spec high-cycle hardware on every commercial install, because swapping out a commercial spring at $180 to $340 every few months is not a maintenance plan anyone should accept.
We’ll also check your fire rating requirements and clearance around the opening. A door that doesn’t meet code will fail an inspection, and a door that’s undersized for the opening wastes energy and creates a security gap no business can afford.
Around Your Schedule
Most Burbank businesses don’t have the luxury of shutting down for a week while a door goes in. We schedule commercial installs in phases, often doing the heavy lifting before open or after close. If the door is your loading dock’s only barrier, we’ll coordinate so you’re never left exposed overnight.
We service businesses throughout Burbank, Studio City, and North Hollywood, and we’re familiar with the specific clearance and access challenges those older commercial buildings present. We also provide Garage Door Installation – West Hollywood and surrounding areas.
Garage Door Installation Contractors
Garage Door Installation Contractors are the crew you hire when the job needs to be done right the first time and covered by a real warranty. A licensed contractor brings the experience to spot structural issues, the tools to handle high-tension springs safely, and the accountability that comes with a name and a business behind the work. We operate as a full install crew, not a lead-generation service that sends out whoever is available. When you call Golden Bear, you get our people, our vans, and our workmanship guarantee on every job from a simple seal replacement to a full $700 to $2,200 door installation.
Why We Never Subcontract
Every tech who shows up at your Burbank home works for us. That means the person who measures is the person who installs is the person who answers if something needs a follow-up visit. No passing the job to a third party, no “the installer was a subcontractor” deflection.
This matters most on complex installs where the floor is uneven, the opening is non-standard, or the opener needs to integrate with a smart-home setup. The person on site has the full picture because they’ve had it since the first measurement.
What You’re Actually Paying For
A cheap install quote often means the contractor is cutting corners on hardware, skipping the balance test, or not hauling away the old door unless you pay extra. We itemize everything and the quote you approve is the price you pay. No surprises at the end, no add-ons for things that should have been in the scope from the start.
If a contractor’s quote seems too low next to ours, ask what they’re leaving out. Track mounting brackets, weather stripping, and haul-away are the usual casualties.
Garage Door Seal Installation
Garage Door Seal Installation replaces the rubber or vinyl gasket that runs along the bottom of your door and the weather stripping around its perimeter. This is one of the most overlooked maintenance items on a garage, and it’s also one of the cheapest to fix correctly. A bottom seal that’s cracked, flattened, or torn lets water in during Burbank’s winter rains, lets heat in during the summer, and clears a path for every pest in the neighborhood. We replace seals as a standalone job or as part of a larger installation, and the work keeps your garage dry, your energy bill lower, and your floor free of debris that blows under the door.
Signs Your Seal Is Shot
You can see daylight through the gap under your closed door, or you find leaves and dust collecting just inside the threshold. Run your hand along the bottom seal: if it’s brittle and crumbling, it’s done. Burbank’s dry heat hardens rubber faster than most homeowners expect, and a seal that’s only three years old may already be failing.
We stock seals for the most common residential door widths and can order exact-fit replacements for Clopay, Amarr, and Wayne Dalton doors on request. A new seal costs a fraction of the water damage it prevents.
Installed as Part of a New Door
When you’re getting a new door anyway, the seal is part of the install, and we make sure it contacts the floor evenly across the full width. A common issue we see on DIY installs is a seal that’s flat on one side and gapped on the other because the door wasn’t leveled first.
We also check the side and top weather stripping, which is often overlooked entirely until a homeowner notices dust or drafts. It’s a small thing that changes how the garage feels every day.
New Garage Door Installation
New Garage Door Installation is the full-service process of selecting, ordering, and installing a brand new door system for your Burbank home. This covers everything from the first consultation through final balance testing and cleanup. We’ll help you choose between steel and aluminum, insulated and non-insulated, windows or no windows, and match the style to your home’s architecture. A new door installation in Burbank runs $700 to $2,200, and we’ll give you a written quote after measuring so there’s no ambiguity about what you’re paying. We also offer Beverly Hills Garage Door Installation with the same transparent pricing. The door comes from a major manufacturer, the work is done by our crew, and the result is a door that operates smoothly and looks like it belongs.
Choosing the Right Door for Burbank’s Climate
Your garage is likely the largest uninsulated space attached to your home. In Burbank’s summer heat, that space gets hot, and that heat radiates into whatever room shares a wall with the garage. We recommend insulated doors on attached garages even if the garage itself isn’t conditioned, and we’ll explain the R-value tradeoffs when you’re selecting a door.
Windows add curb appeal but also add heat gain and a potential security concern. We’ll walk through the options with you, but we won’t upsell you into a glass-heavy door if you’ve told us the garage is a workshop or storage space.
What’s Included in Every Install
Every new door installation includes the door, tracks, springs, hinges, rollers, weather seal, and all mounting hardware. We set the spring tension to spec, lubricate every moving part, and run the door through a full test cycle before we leave. The old door is removed and hauled away.
We also walk you through operation and basic care before we head out. You’ll know how to check your balance, what the different sounds mean, and when to call us instead of forcing a door that’s starting to bind.
Brands We Service
We work on LiftMaster and Chamberlain openers more than anything else in Burbank, and for good reason: they’re installed in a huge percentage of local homes. We’ve rebuilt their gear assemblies, programmed their smart systems, and matched countless new doors to existing LiftMaster and Chamberlain units. We keep common parts for both on the truck, so a diagnosis doesn’t turn into a two-week waiting game for a bracket or a logic board.
Genie and Raynor round out the quartet we see most often. Genie’s screw-drive and belt-drive units each have their own quirks and maintenance profiles, and we know which is which by sound alone. Raynor doors have a distinctive panel profile and hardware spec that we recognize on sight, which means we’re ordering the right parts the first time and not guessing from a catalog photo. Whatever is on your door, we know it.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Your door is sagging on one side. This almost always means a worn cable, a weakened spring, or a bent track. Running the door in this condition strains the opener and risks a sudden drop, and a falling garage door can injure anyone in its path. Professional repair starts at $120 to $240 for track realignment and goes up from there depending on what’s actually wrong.
- You hear a sharp snap and the door won’t open. That’s a broken torsion spring, and those springs are under enough tension to cause serious injury if mishandled. Do not attempt a DIY spring replacement. Spring repair in Burbank runs $180 to $340, and we carry the right springs on the truck so the fix usually happens the same day.
- The door reverses or bounces when closing. The auto-reverse sensor may be misaligned or the force settings are out of spec. This is a safety issue, not an annoyance: the auto-reverse is what stops the door from closing on a child or pet. We’ll recalibrate the sensors and the opener’s force limit, and check the door balance to rule out a deeper problem.
- The bottom of the door is dragging or gapped. The door may have settled, the track may be out of square, or the bottom seal is done. A gapped seal lets water and pests in; a dragging door wears down the opener and the panels. We’ll diagnose the cause and give you a fixed quote before any work starts.
- Your energy bill has spiked and the garage feels like an oven. That points to poor insulation, failed weather seals, or a door that no longer closes flush against the opening. We’ll find the gap and fix it, whether it’s a seal replacement or a full insulated door replacement.
Our Process, Step by Step
- 1
You call and tell us what’s going on. We’ll ask a few questions about your current door, the brand, the age, and what you’re seeing and hearing. This helps us come prepared with the right parts and the right approach, and it gives us a chance to give you an honest read on whether you’re looking at a repair or a replacement.
- 2
We arrive for the on-site visit. We examine the door, the track, the springs, the opener, and the surrounding structure. We measure the opening, check the floor level, and test the balance. If you’re getting a new door, we’ll go over materials, insulation, windows, and style options, and write up a scope of work.
- 3
You approve the written quote. The price is set before we start, and it doesn’t move unless you add to the scope. We don’t do verbal estimates with a ‘we’ll see how it goes’ caveat. What we quote is what you pay, and what we quote is what the job is worth, no more.
- 4
We do the work the same visit or on a scheduled install. For repairs, we carry the most common parts and complete most jobs same-day. For installations, we schedule the work, bring the door, and complete the full install in one visit. We torque springs to manufacturer spec, level the track, and test every cycle.
- 5
We walk the finished job with you. You see the door operate, you hear it, you check the seal and the balance yourself. We show you how to maintain it, what to watch for, and we answer any question you have before we leave. You’ll have our number if anything comes up after.
How Much Does Garage Door Installation Cost in Burbank?
A new garage door installation in Burbank runs $700 to $2,200. That covers a standard residential garage, with the final number moving based on size, material, insulation, window packages, and whether we’re installing a new opener at the same time. Opener installation adds $250 to $550 if you need a new unit, while replacement of a single panel runs $250 to $500 when you don’t need the whole door. Spring repair, the most common single item we handle, runs $180 to $340. Cable repair runs $130 to $250, track realignment $120 to $240, and roller replacement $110 to $220.
The biggest cost drivers are insulation level and door size. A single-car uninsulated steel door sits at the bottom of that range; a double-wide insulated door with windows sits at the top. We also factor in your existing opener’s horsepower and whether we’re retrofitting a new door to old tracks, which we don’t recommend but will handle if the tracks are in good condition.
The way to avoid overpaying is to get a written, itemized quote and ask what’s included. Haul-away, weather seal, track hardware, and balance testing should all be in the scope, not billed as surprises at the end. Our free estimate includes the full breakdown, and the price we quote is the price you pay. Call (833) 467-4118 and you’ll know exactly what the job costs before you commit, with no obligation.
Our Service Area Near Burbank
We install and repair garage doors throughout Burbank and the surrounding neighborhoods, including Garage Door Installation in West Hollywood and Garage Door Installation in Hollywood. Our service area also covers Studio City, North Hollywood, Universal City, Beverly Hills, Century City, Koreatown, Westwood, Culver City, and Silver Lake. If you’re nearby and aren’t sure whether we cover your street, call and ask. The answer is probably yes.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Garage Door Installation in Burbank
Garage door installation is the process of fitting a new door system to your garage opening, including the tracks, springs, hinges, rollers, and weather seal, then balancing the door and integrating it with your opener. It’s not a handyman job; incorrect spring tension or misaligned tracks can make a new door dangerous and wear out the opener prematurely. We handle every part of it in-house, from the first measurement to the final balance test.
Most residential garage door installations in Burbank are completed in one day, usually four to six hours from arrival to final walkthrough. The exact time depends on the door size, whether we’re replacing track hardware, and whether a new opener is part of the job. We’ll tell you the expected timeline when we give you the quote, and we stick to it.
A new door installation in Burbank ranges from $700 to $2,200 depending on size, material, insulation, and options like windows. Adding a new opener adds $250 to $550. We quote the job in writing before you approve anything, and the number doesn’t move after we start. Call (833) 467-4118 for a free estimate and an exact price for your specific opening.
Yes, we work on LiftMaster and Chamberlain openers extensively, including the smart-enabled models with MyQ connectivity. They’re two of the most common brands in Burbank garages, and we keep their common repair parts stocked so we can usually handle issues the same day. We also service Genie, Craftsman, and Raynor units, and we match new doors to whatever opener you’re keeping.
Installation is scheduled, not dispatched, because it requires measurement, product ordering, and a dedicated time block. What we can do same-day is most repair work: broken springs, snapped cables, doors off track, and opener failures are our emergency calls. If your door is stuck open and your garage is exposed, call us and we’ll get someone out to secure it while we plan the permanent fix or replacement.
Yes, every new door we install is covered by the manufacturer’s warranty on the door and our workmanship guarantee on the installation itself. If something isn’t right after we leave, you call us and we make it right. We won’t quote a specific year count here because warranty terms vary by manufacturer and model, but we’ll show you the exact coverage on the door you’re choosing before you commit.
Clear the area inside the garage at least six feet back from the opening and move anything that’s stored against the walls on either side of the door. You’ll also want cars parked outside the garage the morning of the install. We’ll handle the rest, including hauling away the old door and any packaging, and we’ll sweep the work area before we go.
Schedule Your Garage Door Installation Service in Burbank Today
Your garage door is the largest moving part on your home, and it deserves an install that’s measured, balanced, and backed by people who do this work every day. Whether you’re replacing a failing door, adding a new one, or just getting a quote so you can plan the project, call Golden Bear at (833) 467-4118. Estimates are free, there’s no obligation, and you’ll get a straight answer from someone who knows your door. If you’re closer to the city, you can also visit our home page to see what else we handle.
Written by Gil Tanner, Owner at Golden Bear Garage Door Repair, serving Burbank and the surrounding area.